Triacetoxyethylsilylane is a polymer used in sealants, adhesives, and cross-linking agents. Its legacy brand name was Alfa Aesar, so some documentation may refer to the product code of this old brand. Because it is sensitive to moisture, this product should be stored under inert gas and away from oxidizing agents. This article provides an overview of the most important information about this polymer.
Classification
There is no data on the explosive properties of triacetoxyethyl silane. The molecule has a flash point of 104 deg C. It is not expected to react vigorously with water. The hazard spectra of the compound indicate that the substance is not a carcinogen. However, it can cause severe burns to the skin.
Release to environment
Triacetoxyethylsilene is a chemical compound that is used in a wide variety of products. It is a widely used cross-linking and adhesion promoter in sealants and other products. The substance is extremely moisture-sensitive, so proper storage and disposal methods are important. The substance is typically stored under inert gas. It should be stored away from oxidizing agents.
TRI is released to the environment in several ways. Chemical waste may be released directly into the air or water, or it may be disposed of in a land disposal unit. Most TRI releases occur during routine production activities at facilities. Regulations and restrictions for TRI releases have been put into place to minimize the amount of harmful chemical release. In addition, TRI is classified as a hazardous chemical by the EPA.
Safety precautions
If you are using this chemical, there are several safety precautions that you should know. It is important to read the Safety Data Sheet carefully. These sheets are prepared in compliance with EU REACH Regulation and reflect current scientific and technical knowledge. This information is not intended to substitute the advice of a health care professional. Please review the SDS before you begin using the chemical. It should be read in full and understood by all people who may be exposed to it.
Triacetoxyethylsiloxane is a chemical used in the manufacturing of sealants, adhesives, and other products. It is very slippery and should not be handled by children. Always use a suitable container for the chemical. It should also be stored under inert gas. Do not store this chemical near oxidizing agents or in drains.
Teratogenicity
There are several chemicals CAS:96220-76-7 found in labs that can affect the development of an embryo fetus. These chemicals are known as teratogens. A study conducted by Wildlife International, Ltd. concluded that triacetoxyethylsilane was teratogenic to rainbow trout. It is not known how long exposure would be before a human fetal condition was identified.
In lab animals, methyl-triacetoxysilane caused benign uterine adenomas and protoporphyrin accumulation. However, these effects were not observed in humans. Although triacetoxyethylsilane has low bioconcentration potential and no information on teratogenicity, it is still dangerous for the unborn.
Aspiration hazard
Aspiration hazards are substances that can enter the lungs and trachea through the oral cavity or nasal cavity. When a person inhales these substances, they can injure themselves and cause negative health effects. Aspiration hazards are classified by toxicity and range from mildly toxic to fatal. Here are the key elements of triacetoxyethylsilane labels.
The term “aspiration” refers to the process of inhaling a liquid or solid chemical product. Aspiration occurs when a liquid or solid material lodges in the respiratory system during a person’s inspiration. The causative material lodges in the laryngopharynx and the lungs suffer serious acute effects. The respiratory system is the body’s main defense against these toxins.
Also Read: How To Make Uber Clone Stand Out By 2022 With Top Features
